• Excellent bounciness
• Superior soft touch
• Minimal effect on hues and tones of the fabrics
• Non-ionic
• Stable to pH ranges from 4 to 8
• Stable to temperature ranges from 30°C to 45°C
• Can be recommended along with OBA (max 8 gpl)

Dosage recommendation:

	On 100% Cotton Woven (Bottom twill, shirting)
	On 100% Cotton Knits PQ, S/J
	On PET/Viscose

Ultrafab Supreme – stability studies

In Resin Bath

2. Ultra 2Soft

The product is water soluble, ready to use, micro emulsion.
Optimised organo-modification and unique combination polymer system to achieve consistent hand feel on all kinds of substrates including cotton and cotton blends. Best recommended for garment finishing and knits finishing (Wet on Wet)

1. Best recommended on garment and knits finishing (Wet on Wet only)
2. The micro particle size ensures good penetration inside fabric
3. Smooth handle with optimum drape
4. Recommended by WET ON WET PADDING ONLY
5. Economical

For cotton, cotton blends, polyester

Ultra 2Soft   Competitor   By Exhaustion Dosage – 3%

* Higher the rating better the handle

Ultra 2Soft   Competitor   By Wet on Wet Padding Dosage – 50 gpl

3. Ultralube SPE

• High Density Polyethylene
• Improves sewability
• Improves tear strength when used along with wrinkle free finishing
• Soft smooth handle 

By saturation/ exhaustion
Dosage: 2-4%
By padding:
Dosage: 20-40 gpl
pH: 5-5.5 Using Ultrafab FP
Dry:140° C

4. Ultrafab ECOSIL

Finish features

• Smooth surface, bulky handle
• Recommended for fabric finishing
• Best recommended on 100% cotton, synthetics and their blends
• Best recommended on Dry on Wet padding

For synthetics, cotton and their blends Dry on Wet Padding Ultrafab ECOSIL : 5-15 gpl for polyester and blends Ultrafab ECOSIL : 10-30 gpl for 100% cotton fabrics pH: 5 Using Ultrafab FP Temperature: RT Time: 1 dip/ 1 Nip Dry: 140-160°C

 

 

 

 

	On 100% Polyester fabric
	On P/V (67/33) fabric
	On 100% Cotton fabric

OBA stability


Stable with medium substantive OBA
OBA: 8 gpl + Ultrafab ECOSIL 10 to 30 gpl – Stable at pH 5.5 @ RT (in the finishing bath)

6. Innocelle HiConc
Finish features:

• Patented technology, which provides excellent softness and hydrophilicity
• Highly concentrated to be diluted and used, easily dilutable
• Excellent silky touch and hydrophilicity
• Uniform pile arrangement in towels
• Non-yellowing
• Can be used in soft flow
• Low foaming
• Good wicking property

On 100% cotton terry towels / knits/ wovens
By exhaustion Dosage: 1-2% (Dilution: 1:5-1:9) pH: 5-5.5 Temperature: RT Dry: 120°C	By padding Dosage: 10 – 30 gpl (Dilution: 1:5-1:9) pH: 5-5.5 Temperature: RT Dry: 120°C

New projects: Pipe line

Ezycare Bioprep - Bio–scouring - Not a myth!!!
• Eco-friendly and less consumption of energy
• Less weight loss, thus increase in profit
• Very minimum strength loss
• Very minimum damage to cotton and makes the cotton soft
• Uniform and excellent hydrophilicity
• No difference in whiteness achieved in conventional process
• High reduction in COD values, makes effluent treatment easy
• Reduction in chemical and water usage
• Safe in handling chemicals

 



DOSAGE:

Resiscour JET NV	0.75-1%
Ezycare Bioprep	1%
Caustic	0.75%
Peroxide	Depends upon the requirement of whiteness

2. Ezycare 3D – Introducing an online pretreatment package ……

Product features:

• Enzymatic peroxide neutralising, bio-polishing and dyeing... All in one bath!!!
• Combi enzyme can perform in the above 3 beneficial angles which reduces the processing load in huge percentage and moreover eco-friendly
• Excellent absorbency and whiteness and very minimum strength loss
• Good uptake of dye
• Neat and cleaned fabric surface
• Minimum strength loss on knits
• Highly cost effective processing method compared to conventional process
• Saves energy, time of treatment and consumption of water

Recommendations:

• Ezycare 3D: 1%